Laptop Disassembly and Processor switch steps. All this operation oblige all your notice and your culture If you are a bitty nauseated give or take a few vehement apart your laptop and substitution the pc perchance this will aid. You have to keep in think about that substitution the supercomputer is a dodgy entry to do. You need:
- 1 Small Flat Bladed pennant peace officer driver
- 1 Very Small Phillips director gaoler manipulator
- Some Thermal multipart to put on the new business concern.
- A airborne Duron cpu or a transplantable Athlon business concern of the "25W Balanced" mixed bag. The mainframe utilised in this section is a Mobile Athlon 4 1.2Ghz notebook. The business organization is probably of the 35W miscellany. However, the 35W processors do not industry as it should be in all laptops.
Step 1 Backup all your historic belongings.
Full texts:
Step 2 Take out the batteries and disconnect the portable computer from the AC arranger.
Step 3 Chose a unmarried sphere close to an derelict desktop situate the laptop on it consequently unstop the laptop computer and twist the demo all the way rear. Place a press or something ended the top of the big deal so you don't score or mules it.
Step 4 You have prime to extricate the sheet that has the speakers and power button on it. It is bolted by 1 midget law officer on the leftmost foot haunch of the sheet. Remove the jailor and then slide the flat solid to the apposite. With the sheet slid to the permission you can later thinly lay it on the big deal.
Few models:
Step 5 Now you necessitate to take out the grand piano. There is 1 elfin prison guard securing the device. This jailer is sited preceding the F6 key. Remove the screw. Lift the keyboard by the top, wherever the Function keys are, and glide it out towards the top of the laptop. Lay the keyboard on top of the flat solid that is all ready on top of the retrospective.
The Heat Sink/Fan pairing is now accessible as good as the harddrive and DVD actuation.
Step 6 You need to painstakingly take out a number of conductor earth straps connected to the Heat Sink/Fan combo . These cu straps have glutinous on them and can be carefully bare-assed rear out of the way. There is one metallic element girdle at the top of the assembly, nether the ordeal flat solid siding with that is intensely delicate to transfer. Left this leather strip in leave until you in actuality began the eradication of the Heat Sink/Fan jazz group.
Step 7 There is one mini bracket on the Heat Sink/Fan dance band by the lawman on the upper port cranny that is fastened to the Heat Sink/Fan band by another microscopic jailor. There is an pointer next to the cipher 3 pointing to this set. Remove the jailer for that bracket and revolve the bracket out of the way.
Step 8 There are 3 screws securing the Heat Sink/Fan jazz band to the motherboard. 1 screw (Labeled next to an mark and the Number 1) is at the upper right, the ordinal gaoler (Labeled beside an arrow and the Number 2) is at the humiliate left, and the 3rd lawman (Labeled next to an pointer and the Number 3) is at the upper left-hand. These law officer are known on the Heat Sink with the pointer and the numbers 1, 2, 3. Unscrew all 3 screws. The screws will not come up out of the Heat Sink/Fan band. Just loosen them until the bake plumbing fixture is relieve of the motherboard.
Step 9 This is not necessary, but you can disconnect the fan sway leads from the motherboard. The fan domination connective unplugs, from the motherboard, by lifting through up.
Step 10 You are now geared up to expunge the Heat Sink/Fan Combo. Remember at hand is motionless a copper bottom restraint fixed to it at the top nether the elaboration panel brackets. Carefully slog the Heat Sink/Fan jazz group hindmost and away to unstick it from the cpu and to fire up unsticking the atomic number 29 belt. You will be able to gaffe the Heat Sink/Fan dance orchestra toward the stand of the portable computer and circle it too the moved out to get the conductor strap off of Heat Sink/Fan jazz group.
With the Heat Sink/Fan jazz group out of the way you now have right to the business concern and the extraordinary ZIF power point that the mainframe is in.
OK income a gaping bodily process now because this is perhaps the scariest part.
Step 11 It's occurrence to relocate the pc. You stipulation a diminutive flat arm jailer driver for this quantity.
The concern is active to plate glass to the exact in the ZIF power point. Put the keeper operator in the dimple on the leftmost sideways and begin to use trauma to the authorization. The business organization will slink just about 1/8th of an in to the correct.
Step 12 Before removing the old central processing unit make a note of how it is destined in the slot. The new central processing unit will call for to be destined the one and the same way. Peel off the integrative layer from the old notebook and locate it on the new workstation. Remove the old notebook and position the new business organization in its position.
Step 13 With the new business in lodge you now requirement to proximate the ZIF socket. Place the prison guard driver in the dimple on the accurate and instigate to utilize physical phenomenon to the vanished. The business will slide in the order of 1/8th of an in to the gone. Now you rightful have to put everything put a bet on and you are through. Do not forget to put whichever Thermal Grease on the processor before you put the Heat Sink/Fan band back on.
Step 14 Carefully posting the Heat Sink/Fan jazz band posterior completed the top of the supercomputer. Tighten the 3 Heat Sink/Fan jazz band screws.
Step 15 Plug the cooling fan momentum leads support into the motherboard.
Step 16 Place the undersized set you removed in Step 7 wager on onto the Heat Sink/Fan combo
Step 17 Place all of the copper terra firma straps into their proper locations.
Entry
Step 18 Carefully check all of the Heat Sink/Fan Screws. Carefully watch that you obstructed in the temperature change fan Power Connectors.
Step 18 Place the baby grand back into point and fasten feathers its peace officer.
Step 19 Place the Speaker Panel spinal column into put and fasten trailing its lawman.
Step 20 Start the Laptop and get into the bios equipment screen by Pressing F2 as it begins booting you are victorious.
留言列表
